Aby rozpocząć wyszukiwanie, należy wprowadzić minimum 2 znaki.

Proline Prowirl R 200 / 7R2B

Przepływomierz wirowy, Proline Prowirl R 200 ©Endress+Hauser

This product is no longer available.

Please check new generation in the section predecessor / successor or contact your local Endress+Hauser entity.

Funkcje i specyfikacja

Powrót

Details

  • Zasada pomiaru

    Vortex

  • Product headline

    The flowmeter with the same accuracy despite line size reduction, available as compact or remote version. Integrated temperature measurement for mass/energy flow of saturated steam. Dedicated for applications with very low or reduced flow.

  • Sensor features

    Cost and time saving – no pipework modifications needed for line size reduction. High availability – proven robustness, resistance to vibrations, temperature shocks & water hammer. No maintenance – lifetime calibration. Integrated diameter reduction by 1 or 2 line sizes. Nominal diameter (mating pipe) up to DN 250 (10").

  • Transmitter features

    Convenient device wiring – separate connection compartment. Safe operation – no need to open the device due to display with touch control, background lighting. Integrated verification – Heartbeat Technology. Display module with data transfer function. Robust two‐chamber housing.

  • Średnica nominalna

    DN 25 to 250 (1 to 10")

  • Materiały w kontakcie z medium

    Measuring tube: 1.4408 (CF3M)
    DSC sensor: 1.4435 (316/316L)
    Connection: 1.4404 (F316/F316L)

  • Wielkości mierzone

    Volume flow, mass flow, corrected volume flow, energy flow, heat flow difference, temperature

  • Maksymalny błąd pomiaru

    Volume flow (liquid): ±0.75 %
    Volume flow (steam, gas): ±1.00 %
    Mass flow (liquid): ±0.85%
    Mass flow (steam, gas): ±1.7 %

  • Zakres pomiarowy

    Liquid: 0.26 to 545 m³/h (0.15 to 321 ft³/min)
    depending on medium: water with 1 bar a, 20 °C (14.5 psi a, 68° F)
    Steam, gas: 3.6 to 7262 m³/h (2.12 to 4274 ft³/min
    depending on medium: steam with 180 °C, 10 bar a (356 °F, 145 psi a); air with 25 °C, 4.4 bar a (77 °F, 63.8 psi a)

  • Maks. ciśnienie procesu

    PN 40, Class 300, 20K

  • Zakres temperatury medium

    Standard: –40 to +260 °C (–40 to +500 °F)
    High/low temperature (option): –200 to +400 °C (–328 to +752 °F)
    High/low temperature (on request): –200 to +450 °C (–328 to +842 °F)

  • Temperatura otoczenia

    Compact version (standard): –40 to +80 °C (–40 to +176 °F)
    Compact version (option): –50 to +80 °C (–58 to +176 °F)
    Remote version (standard): –40 to +85 °C (–40 to +185 °F)
    Remote version (option): –50 to +85 °C (–58 to +185 °F)

  • Materiał obudowy czujnika

    Sensor connection housing: AlSi10Mg, coated; 1.4408 (CF3M)

  • Materiał obudowy przetwornika

    AlSi10Mg, coated; 1.4404 (316L)

  • Stopień ochrony

    Compact version: IP66/67, type 4X enclosure
    Sensor remote version: IP66/67, type 4X enclosure
    Transmitter remote version: IP66/67, type 4X enclosure

  • Wyświetlacz

    4‐line backlit display with touch control (operation from outside)
    Configuration via local display and operating tools possible
    Remote display available

  • Wyjścia

    4‐20 mA HART (passive)
    4‐20 mA (passive)
    Pulse/frequency/switch output (passive)

  • Wejścia

    4‐20 mA (passive)

  • Komunikacja cyfrowa

    HART, PROFIBUS PA, FOUNDATION Fieldbus

  • Zasilacz

    DC 12 to 35 V (4‐20 mA HART with/without pulse/frequency/switch output)
    DC 12 to 30 V (4‐20 mA HART, 4‐20 mA)
    DC 12 to 35 V (4‐20 mA HART, pulse/frequency/switch output, 4‐20 mA input)
    DC 9 to 32 V (PROFIBUS PA, pulse/frequency/switch output)

  • Dopuszczenia do stosowania w strefach zagrożonych wybuchem

    ATEX, IECEx, cCSAus, EAC

  • Inne certyfikaty i dopuszczenia

  • Functional safety

    Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511

  • Metrological approvals and certificates

    Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)

  • Pressure approvals and certificates

    PED, CRN, AD 2000

  • Material certificates

    3.1 material
    NACE MR0175/MR0103, PMI (on request); welding test acc. to ISO 15614‐1, similar to ASME IX (on request)

  • Zasada pomiaru

    Vortex

  • Product headline

    The flowmeter with the same accuracy despite line size reduction, available as compact or remote version. Integrated temperature measurement for mass/energy flow of saturated steam. Dedicated for applications with very low or reduced flow.

  • Sensor features

    Cost and time saving – no pipework modifications needed for line size reduction. High availability – proven robustness, resistance to vibrations, temperature shocks & water hammer. No maintenance – lifetime calibration. Integrated diameter reduction by 1 or 2 line sizes. Nominal diameter (mating pipe) up to DN 250 (10").

  • Transmitter features

    Convenient device wiring – separate connection compartment. Safe operation – no need to open the device due to display with touch control, background lighting. Integrated verification – Heartbeat Technology. Display module with data transfer function. Robust two‐chamber housing.

  • Średnica nominalna

    DN 25 to 250 (1 to 10")

  • Materiały w kontakcie z medium

    Measuring tube: 1.4408 (CF3M)
    DSC sensor: 1.4435 (316/316L)
    Connection: 1.4404 (F316/F316L)

  • Wielkości mierzone

    Volume flow, mass flow, corrected volume flow, energy flow, heat flow difference, temperature

  • Maksymalny błąd pomiaru

    Volume flow (liquid): ±0.75 %
    Volume flow (steam, gas): ±1.00 %
    Mass flow (liquid): ±0.85%
    Mass flow (steam, gas): ±1.7 %

  • Zakres pomiarowy

    Liquid: 0.26 to 545 m³/h (0.15 to 321 ft³/min)
    depending on medium: water with 1 bar a, 20 °C (14.5 psi a, 68° F)
    Steam, gas: 3.6 to 7262 m³/h (2.12 to 4274 ft³/min
    depending on medium: steam with 180 °C, 10 bar a (356 °F, 145 psi a); air with 25 °C, 4.4 bar a (77 °F, 63.8 psi a)

  • Maks. ciśnienie procesu

    PN 40, Class 300, 20K

  • Zakres temperatury medium

    Standard: –40 to +260 °C (–40 to +500 °F)
    High/low temperature (option): –200 to +400 °C (–328 to +752 °F)
    High/low temperature (on request): –200 to +450 °C (–328 to +842 °F)

  • Temperatura otoczenia

    Compact version (standard): –40 to +80 °C (–40 to +176 °F)
    Compact version (option): –50 to +80 °C (–58 to +176 °F)
    Remote version (standard): –40 to +85 °C (–40 to +185 °F)
    Remote version (option): –50 to +85 °C (–58 to +185 °F)

  • Materiał obudowy czujnika

    Sensor connection housing: AlSi10Mg, coated; 1.4408 (CF3M)

  • Materiał obudowy przetwornika

    AlSi10Mg, coated; 1.4404 (316L)

  • Stopień ochrony

    Compact version: IP66/67, type 4X enclosure
    Sensor remote version: IP66/67, type 4X enclosure
    Transmitter remote version: IP66/67, type 4X enclosure

  • Wyświetlacz

    4‐line backlit display with touch control (operation from outside)
    Configuration via local display and operating tools possible
    Remote display available

  • Wyjścia

    4‐20 mA HART (passive)
    4‐20 mA (passive)
    Pulse/frequency/switch output (passive)

  • Wejścia

    4‐20 mA (passive)

  • Komunikacja cyfrowa

    HART, PROFIBUS PA, FOUNDATION Fieldbus

  • Zasilacz

    DC 12 to 35 V (4‐20 mA HART with/without pulse/frequency/switch output)
    DC 12 to 30 V (4‐20 mA HART, 4‐20 mA)
    DC 12 to 35 V (4‐20 mA HART, pulse/frequency/switch output, 4‐20 mA input)
    DC 9 to 32 V (PROFIBUS PA, pulse/frequency/switch output)

  • Dopuszczenia do stosowania w strefach zagrożonych wybuchem

    ATEX, IECEx, cCSAus, EAC

  • Inne certyfikaty i dopuszczenia

  • Functional safety

    Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511

  • Metrological approvals and certificates

    Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)

  • Pressure approvals and certificates

    PED, CRN, AD 2000

  • Material certificates

    3.1 material
    NACE MR0175/MR0103, PMI (on request); welding test acc. to ISO 15614‐1, similar to ASME IX (on request)

  • Zasada pomiaru

    Vortex

  • Product headline

    The flowmeter with the same accuracy despite line size reduction, available as compact or remote version. Integrated temperature measurement for mass/energy flow of saturated steam. Dedicated for applications with very low or reduced flow.

  • Sensor features

    Cost and time saving – no pipework modifications needed for line size reduction. High availability – proven robustness, resistance to vibrations, temperature shocks & water hammer. No maintenance – lifetime calibration. Integrated diameter reduction by 1 or 2 line sizes. Nominal diameter (mating pipe) up to DN 250 (10").

  • Transmitter features

    Convenient device wiring – separate connection compartment. Safe operation – no need to open the device due to display with touch control, background lighting. Integrated verification – Heartbeat Technology. Display module with data transfer function. Robust dual- compartment housing.

  • Średnica nominalna

    DN 25 to 250 (1 to 10")

  • Materiały w kontakcie z medium

    Measuring tube: 1.4408 (CF3M)
    DSC sensor: 1.4435 (316/316L)
    Connection: 1.4404 (F316/F316L)

  • Wielkości mierzone

    Volume flow, mass flow, corrected volume flow, energy flow, heat flow difference, temperature

  • Maksymalny błąd pomiaru

    Volume flow (liquid): ±0.75 %
    Volume flow (steam, gas): ±1.00 %
    Mass flow (liquid): ±0.85%
    Mass flow (steam, gas): ±1.7 %

  • Zakres pomiarowy

    Liquid: 0.26 to 545 m³/h (0.15 to 321 ft³/min)
    depending on medium: water with 1 bar a, 20 °C (14.5 psi a, 68° F)
    Steam, gas: 3.6 to 7262 m³/h (2.12 to 4274 ft³/min
    depending on medium: steam with 180 °C, 10 bar a (356 °F, 145 psi a); air with 25 °C, 4.4 bar a (77 °F, 63.8 psi a)

  • Maks. ciśnienie procesu

    PN 40, Class 300, 20K

  • Zakres temperatury medium

    Standard: –40 to +260 °C (–40 to +500 °F)
    High/low temperature (option): –200 to +400 °C (–328 to +752 °F)
    High/low temperature (on request): –200 to +450 °C (–328 to +842 °F)

  • Temperatura otoczenia

    Compact version (standard): –40 to +80 °C (–40 to +176 °F)
    Compact version (option): –50 to +80 °C (–58 to +176 °F)
    Remote version (standard): –40 to +85 °C (–40 to +185 °F)
    Remote version (option): –50 to +85 °C (–58 to +185 °F)

  • Materiał obudowy czujnika

    Sensor connection housing: AlSi10Mg, coated; 1.4408 (CF3M)

  • Materiał obudowy przetwornika

    AlSi10Mg, coated; 1.4404 (316L)

  • Stopień ochrony

    Compact version: IP66/67, type 4X enclosure
    Sensor remote version: IP66/67, type 4X enclosure
    Transmitter remote version: IP66/67, type 4X enclosure

  • Wyświetlacz

    4‐line backlit display with touch control (operation from outside)
    Configuration via local display and operating tools possible
    Remote display available

  • Wyjścia

    4‐20 mA HART (passive)
    4‐20 mA (passive)
    Pulse/frequency/switch output (passive)

  • Wejścia

    4‐20 mA (passive)

  • Komunikacja cyfrowa

    HART, PROFIBUS PA, FOUNDATION Fieldbus

  • Zasilacz

    DC 12 to 35 V (4‐20 mA HART with/without pulse/frequency/switch output)
    DC 12 to 30 V (4‐20 mA HART, 4‐20 mA)
    DC 12 to 35 V (4‐20 mA HART, pulse/frequency/switch output, 4‐20 mA input)
    DC 9 to 32 V (PROFIBUS PA, pulse/frequency/switch output)

  • Dopuszczenia do stosowania w strefach zagrożonych wybuchem

    ATEX, IECEx, cCSAus, EAC

  • Functional safety

    Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511

  • Metrological approvals and certificates

    Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)

  • Pressure approvals and certificates

    PED, CRN, AD 2000

  • Material certificates

    3.1 material
    NACE MR0175/MR0103, PMI (on request); welding test acc. to ISO 15614‐1, similar to ASME IX (on request)

Dokumentacja / Instrukcje obsługi / Oprogramowanie

Akcesoria / Części zamienne

Nr
Order code
Specification

  • Następca

    • Obraz przepływomierza wirowego Prowirl R 200 o zmniejszonej wielkości linii do pomiarów w zakresie niskiego przepływu
      • F
      • L
      • E
      • X

      Proline Prowirl R 200 / 7R2C

      Przepływomierz wirowy z wewnętrznym przewężeniem czujnika oraz opcjonalną kompensacją od ciśnienia i temperatury. Przeznaczony głównie do aplikacji o bardzo niskich wartościach przepływu.

      Ładowanie
      Ceny tymczasowo niedostępne
      from CHF 803.-

    • Produkty podstawowe

    • Łatwe w doborze, montażu i obsłudze

    Poziom zaawansowania

    Prostota obsługi

    • Produkty standardowe

    • Niezawodne, wytrzymałe i łatwe w utrzymaniu

    Poziom zaawansowania

    Prostota obsługi

    • Produkty zaawansowane

    • Wysoka funkcjonalność i wygoda użytkowania

    Poziom zaawansowania

    Prostota obsługi

    • Produkty specjalistyczne

    • Zaprojektowane z myślą o wymagających procesach

    Poziom zaawansowania

    Prostota obsługi

    Zależna od urządzenia

    Segmentacja FLEX Poziom zaawansowania Prostota obsługi
    • F
    • L
    • E
    • X

    Segment Fundamental

    Zaspokoi Twoje podstawowe potrzeby pomiarowe

    		Poziom zaawansowania
    		Prostota obsługi
    • F
    • L
    • E
    • X

    Segment Lean

    Z łatwością obsłuży Twoje codzienne procesy

    		Poziom zaawansowania
    		Prostota obsługi
    • F
    • L
    • E
    • X

    Segment Extended

    Zoptymalizuje Twoje procesy dzięki innowacyjnym technologiom

    		Poziom zaawansowania
    		Prostota obsługi
    • F
    • L
    • E
    • X

    Segment Xpert

    Sprosta Twoim najbardziej wymagającym pomiarom

    		Poziom zaawansowania
    		Prostota obsługi

    Zależna od urządzenia
Porównaj produkty
Wykorzystujemy pliki cookies do gromadzenia informacji dotyczących Twojego urządzenia, które pomogą nam personalizować i udoskonalać interakcje z nami. Więcej informacji na temat plików cookies znajdziesz w naszej polityce prywatności.